Feature Introduction:
ABS K5P is a high-quality ABS material with a metallic finish. Its surface shows a frosted-like gloss without polishing by printer parameters adjustment or presents a glossy lacquer finish with simple polishing. Using acetone as the polishing solution or the safer one provided by us, it can be polished in minutes to gain a metallic lacquer finish.
Basic Physical Properties:
| ABS K5P | Printed copy (horizontal printing of sample, 100% linear filling) | Injection molded parts | Test standards |
| Density (g/cm3) | 1.05-1.07 | ISO 1183 | |
| Melt flow rate (MFR) 1 | 30-40 | ISO 1133 | |
| Heat deflection temperature(HDT)2 | 75 | ISO 75 | |
| Vicat softening temperature(VST)3 | 91 | ISO 306 | |
| Tensile strength (MPa) | 34-37 | ISO 527 | |
| Elongation at break(%) | 2-4 | ||
| Maximum force(Mpa) | 70-80 | ISO 178 | |
| Flexural modulus(Mpa) | 3000-3600 | ||
| Impact strength(KJ/m2) | 22-28 | ISO 179 | |
| Notch impact strength1(KJ/m2) | 6-10 | ||
*1. Test condition: temperature (T)=220 ℃; Mass (m)=10kg.
*2. Test condition: bending stress=0.45MPa; Heating rate=120 ℃/h.
*3. Test condition: load=10N; Heating rate=120 ℃/h.
Reviews
There are no reviews yet.