Feature Introduction:
PLA Special 3D Filament is designed for the creative aesthetics of 3D printing. The printed products present a dreamy effect of starbursts, light and dark, with a more wonderful performance under the light.
Basic Physical Properties:
| PLA K5 Special | Printed copy (horizontal printing of sample, 100% linear filling) | Injection moulded parts | Test standards |
| Density (g/cm3) | 1.24 | ISO 1183 | |
| Melt flow rate (MFR) 1 | 4-10 | ISO 1133 | |
| Heat deflection temperature(HDT)2 | 60 | ISO 75 | |
| Vicat softening temperature(VST)3 | 59 | ISO 306 | |
| Tensile strength (MPa) | 44-50 | ISO 527 | |
| Elongation at break(%) | 4-8 | ||
| Maximum force(MPa) | 80-90 | ISO 178 | |
| Flexural modulus(MPa) | 2500-3000 | ||
| Impact strength(KJ/m2) | 20-25 | ISO 179 | |
| Notch impact strength1(KJ/m2) | 3-6 | ||
*1. Test condition: temperature (T)=190 ℃; Mass (m)=2.16kg.
*2. Test condition: bending stress=0.45MPa; Heating rate=120 ℃/h.
*3. Test condition: load=10N; Heating rate=120 ℃/h.
